top of page

SP-170 SERIES

The 2-cylinder engines of the SP-170 series are designed with twin spark plugs and can be equipped with a carburetor or a fuel injection. The generator is mounted on the rear output shaft. All engines are equipped with the ignition HKZ215 and the ECU030. The electronics of the HKZ215 can be installed on an additional system carrier which sits on top of the cylinders. The engine is available with or without system carrier.

Versions:

​

  • SP-170 TS ROS  

  • SP-170 FI TS 

  • SP-55 HF FI TS ROS (available upon customer request)
  • SP-170 TS (exhaust on top)

​

> TS – Twin Spark, FI – Fuel Injection, HF – Heavy Fuel,

ROS – Rear output shaft, CR – Carburetor Rear

SP-170 HF FI TS ROS

Weight
Type
Capacity
Speed Range
Weight


Crankshaft
Oil/Gasoline ratio
Operating Voltage
Bore diameter
Stroke
Torque
9.2 kg
2-Cylinder Gas Engine
170 ccm / 10.37 cu in
2000 – 7000 RPM
20.24 lbs (9.2 kg) incl. HF, FI, Starter Generator + Controller, Stainless Steal Exhaust system
4 ball bearings
1:50 / 2% mix
12.5 – 16 V DC
2.01 inch (51.00 mm)
1.61 inch (41.00 mm)
18.19 Nm @ 4750 RPM
SP-170-FI-TS.jpg
Test method: Dynotest - Engine data might change due to the engine test procedure and the engine configuration.

SP-170 TS ROS

Weight
Type
Capacity
Power
Speed Range
Weight
Crankshaft
Oil/Gasoline ratio
Operating Voltage
Bore diameter
Stroke
Torque
4.56 kg
2-Cylinder Gas Engine
170 ccm / 10.37 cu in
12.6 HP / 9.3 KW @ 5250 RPM
1500 – 10000 RPM
incl. ignition 10.03 lbs (4.56 kg)
4 ball bearings
1:50 / 2% mix
6 – 8.4 V DC
2.00 inch (51.00 mm)
1.60 inch (41.00 mm)
18.1 Nm @ 4750 RPM
SP-170-FI-TS.jpg
Weight
Type
Capacity
Power
Speed Range
Weight
Crankshaft
Oil/Gasoline ratio
Bore diameter
Stroke
Torque
7.3 kg
2-Cylinder Gas Engine
170 ccm / 10.37 cu in
13.60 HP / 10.0 KW @ 5500 RPM
1500 – 8000 RPM
incl. ignition 10.89 lbs (4.95 kg)
4 ball bearings
1:50 / 2% mix
2.00 inch (51.00 mm)
1.60 inch (41.00 mm)
18.40 Nm @ 5000 RPM

SP-170 FI TS ROS

SP-170 TS (exhaust on top)

Weight
Type
Capacity
Power
Speed Range
Weight
Crankshaft
Oil/Gasoline ratio
Operating Voltage
Bore diameter
Stroke
Torque
4.56 kg
2-Cylinder Gas Engine
170 ccm / 10.37 cu in
12.6 HP / 9.3 KW @ 5250 RPM
1500 – 10000 RPM
incl. ignition 10.03 lbs (4.56 kg)
4 ball bearings
1:50 / 2% mix
6 – 8.4 V DC
2.00 inch (51.00 mm)
1.60 inch (41.00 mm)
18.1 Nm @ 4750 RPM
bottom of page